Detailed Product Description

Model No.: NDI-100

This Active Injection Box / Phantom Power Adaptertake a signal from an instrument (guitar, bass, keyboard
and etc.) and, by presenting a very high impedance to the instrument and balancing
the output, prepares it for direct connection to a studio or live mixing console.

Specification:
1.Frequency response: 20Hz-20KHz (-3dB)
2.Input impedance: 1M ohm, Jack+Jack link
3.Output impedance: 600 ohms, Balanced (XLR)
4.Attenuation switch: 40dB, -20dB,0dB
5.Ground switch: Connected / Lifted / Floating
6.DC input: 9-12V, 100mA, Negative Center
7.'Low Batt' LED: Indicated at approx 5 volt
8.Dimensions (WxHxD): 100x45x100mm
9.Weight: 0.3kg


Model No.: PHW-22

The PHW-22 will power two microphones. The units power condenser microphones that are designed for phantom powering. Phantom power microphones provide much greater dynamic range, lower noise and better sound quality. Most microphones will operate at full performance with 12 Volts DC, however some mics require 48Volts which was the old mic standard. The PHW-22 feature selectable voltage levels.


Specification:
1.Phantom Voltage: 12V or 48V selectable
2.Jacks: Male an Female XLR jack, 2.5mm DC input jacks
3.Control: 12/48 volt selector foot switch
4.Power Input: 12/48V DC (adapter included)
5.Size: (WxHxD): 100x45x100mm
6.Weight: 0.3kg 9 without adapter

Packing: Gift Box